Henan Yuanda Boiler Co., Ltd.
Henan Yuanda Boiler Co., Ltd. Industiral Boiler Manufacturer Since 1956
Add to Cart
Horizontal Industrial Thermal Oil Boiler 700 Kw Thermic Fluid Heater
Boiler Advantages
1. Three pass coil pipes design, thermal oil goes through the coil pipes and fire in the furnace(fire is surrounded by oil), which makes the boiler has big radiation heating area, highly improves the boiler efficiency and preventing deformation of boiler shell in high temperature heating.
2. Unique heating surface of the back of boiler--smoke turning around room is wet back design(smoke turning around room is surrounded with oil), which avoids dry heating of tube sheets and reduce heat loss.
3. Unique coil integration process, no gaps between coils, then Smoke will not be chaotic and short-circulate. Smoke flows long and smooth, makes the boilers heating enough and efficiency high.
4. Energy saving device design(air preheater, waste heater boiler or economizer is designed behind the boiler), which makes the exhaust temperature low and improves 10% of boiler efficiency.
5. Double-layer aluminum silicate insulation, makes the temperature of shell surface not more than 40℃,which is energy saving and efficient.
6. Dislocation double sealing slot design,secondary leakage prevention, which seals very tight and avoid leakage.
7. Fast-setting and high-strength refractory building materials, strong solidification, long life cycle, and not easy to shake off.
8. Integrated wiring device(Junction box and wire groove), so that wire-controlled connection is more convenient, maintenance is more simple and more beautiful after installation.
9. Outputting oil tank external design,slow down the rate of carbonization of fat and avoid accidents.
10. Roundness treatment for edges and corners of packing panels, which can prevent incidental injury accident in maintenance.
Boiler pictures
1. Semi-finished boiler
2. Thermal oil heater
Boiler Parameter
| Item | Unit | Data | |
| Rated capacity | KW(kcal) | 1400KW(1200,000kcal) | |
| Design pressure | Mpa | 0.8Mpa | |
| Hydrostatictest | Mpa | 1.2 | |
| Rated output temperature | °C | 280 | |
| Rated return temperature | °C | 250 | |
| Heat carrier circulation flow capacity | m³/h | 74.696 | |
| Heating area | Radiative heating area | ㎡ | 7.797 |
| Convection tube heating area | ㎡ | 45.29 | |
| Heating area of economizer | ㎡ | 25.749 | |
| Design efficiency(heavy oil fired) | % | 92.65 | |
| Exhaust temperature(heavy oil fired) | °C | 123.56 | |
| Fuel consumption (heavy oil fired) | kg/h | 131.8 | |
| Heat carrier medium capacity in furnace | m³ | 1.2 | |
| Medium flow speed in radiation area | m/s | 2.54 | |
| Medium flow speed in convection area | m/s | 2.54 | |
| Weight | Ton | 4 | |
| Dimension | mm | 3710*1524*2150 | |
This is only the technical datasheet of our 1400kw(1200,000kcal)thermal oil boiler. For other models,please contact shirley for details.